Bürkert - Close to you
Office /1
    • Main Office
      Burkert Contromatic Limited
      Fluid Control Centre
      1 Bridge End
      Cirencester
      GL7 1QY
      Phone +44 (0)1285 64 87 20
      Fax +44 (0)1285 64 87 21
      E-Mail fnyrf.hx@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8232 - Chlorine Sensor

    Produkt-Foto Typ 8232

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8232
    • Produkt-Foto Typ 8232
    • Produkt-Foto Typ 8232

    Type Description

    The 8232 from Bürkert is an electrochemical sensor designed for the measurement of the free chlorine concentration generated from inorganic sources (chlorine gas, sodium hypochlorite,...). The Type 8232 offer a range of three models: • the Cl-trace sensor (Item no. 565164) with three electrodes, is suitable for the measuring of chlorine at very low concentrations. The membrane of this sensor is less affected by biofouling. It is available with a voltage output on a four-pin fixed connector (connector with cable has to be ordered separately). • the chlorine sensor (Item no. 566052) with three electrodes, has a sensor having a greatly reduced pH-dependency. This model delivers a current output on a two-pin terminal through a cable gland and is designed to be used in a swimming pool, drinking or sea water. The fluid must contain a minimum chlorine concentration ( 0,1 ppm). • the chlorine sensor (Item no. 566051) with two electrodes, delivers a current output on a two-pin terminal through a cable gland. It is designed to be used using in a swimming pool, drinking or process water having similar qualities as drinking water. The fluid to be measured must not contain any surfactants or abrasive particles and its pH value must be at a constant level. The fluid must contain a minimum chlorine concentration ( 0,1 ppm).

    • Trace sensor with three electrodes for measurements at low concentrations
    • Chlorine sensor with three electrodes and greatly reduced pH dependency
    • Chlorine sensor with two electrodes

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Downloads

    Description
    Filename
    Filesize
    Language / Country
    DTS Chlor-Sensor DS8232-Standard-DE-DE.pdf 844.4 kB DE / DE
    DTS Chlorine Sensor DS8232-Standard-EU-EN.pdf 856.9 kB EN / EU
    DTS Capteur de chlore DS8232-Standard-FR-FR.pdf 844.6 kB FR / FR
    MAN Bedienungsanleitung 8232 MA8232-MA-EU-DE.pdf 451.2 kB DE / EU
    MAN Operating Instructions 8232 MA8232-MA-EU-EN.pdf 443.7 kB EN / EU
    MAN Manuel d'utilisation 8232 MA8232-Manual-EU-FR.pdf 453.9 kB FR / EU