Share via email
Some fields are missing
Speech bubbles
Do you have questions?

We are happy to advise you!

Please call us »

Bürkert - Close to you
Office /1
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
 

    Type 8076 - Positive Displacement flowmeter with display, ELEMENT design

    Print
    Produkt-Foto Typ 8076

    The depiction of the products may differ from the actual specific design.

    Please consider the technical attributes.

    • Produkt-Foto Typ 8076
    • Produkt-Foto Typ 8076

    Type Description

    This positive displacement flow transmitter with display Type 8076 is designed for use in slightly viscous fluid like glue, honey. The transmitter is made up of a compact fitting (S070) and an enclosure with cover, containing the electronic module. A removable display completes the transmitter. This ensemble (SE36) is quickly and easily connected to the fitting (S070) by a Quarter-Turn. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access code, adjust 4-20 mA output(s)...) and also for visualizing continuously the measured and processed data. The device Type 8076 is available with: - 2 programmable outputs: one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8076 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals,which are provided via one or two M12 fixed connectors.Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve,activate an alarm and, thanks to 1 or 2 current outputs,establish one or two control loops.

    • Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA current output(s)
    • Removable backlit display of flow rate and/or 2 two totalized volumes
    • Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Flow Fitting for 807X-SE30EX 242 kB EN / EU
    DTS Ovalgear Transmitter 428 kB EN / EU
    DTS Durchfluss-Fitting 807X-SE30EX 681 kB DE / DE
    DTS Ovalrad-Transmitter 436 kB DE / DE
    DTS Raccord de débit roues ovales 655 kB FR / FR
    DTS Transmetteur Débit roues ovale 434 kB FR / FR

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Operating Instructions Type S070 | Positive displacement sensor-fitting 293 kB EN,FR,DE / EU

    Interactive Animation

    Description
    Filesize
    Language / Country
    3D_ANIMATION 3D-Animation - 8076 3 MB DE
    3D_ANIMATION 3D-Animation - 8076 3 MB EN

    My Comparison List