Do you have questions?

We are happy to advise you!

Please call us »

Bürkert - Close to you
Office /1
    • Main Office
      Burkert Contromatic Limited
      Fluid Control Centre
      1 Bridge End
      Cirencester
      GL7 1QY
      Phone +44 1285 64 87 20
      Fax +44 1285 64 87 21
      E-Mail fnyrf.hx@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8026 - INSERTION flowmeter with paddle wheel, ELEMENT design

    Produkt-Foto Typ 8026

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8026
    • Produkt-Foto Typ
    • Produkt-Foto Typ

    Type Description

    The flowmeter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing, etc.). Type 8026 is available with: - 2 configurable outputs: one transistor output (NPN) and one 4...20 mA current output (2-wire) - 3 configurable outputs: two transistor outputs (NPN/PNP) and one 4...20 mA current output (2-wire) - 4 configurable outputs: two transistor outputs (NPN/PNP) and two 4...20 mA current outputs (3-wire). Type 8026 converts the measured signal, displays different values in different units (if display/configuration module mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.

    • Up to PN10, size of measurement pipes: DN20 to DN400
    • Configurable outputs: one or two transistor output(s) and one or two 4...20 mA current output(s)
    • Removable backlit display/configuration module for indication of flow rate and volume with two flow totalizers
    • Automatic calibration using Teach-In, all outputs can be checked without the need for actual flow

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Fitting for insertion Sensor 402.9 kB EN / EU
    DTS Flowmeter ELEMENT 2.1 MB EN / EU
    DTS Durchflussmessgerät ELEMENT 2.1 MB DE / DE
    DTS Débitmètre ELEMENT 2.1 MB FR / FR
    DTS Fitting für Insertion-Sensor 400.7 kB DE / DE
    DTS Raccord à insertion 400.2 kB FR / FR
    DTS Transmisor Caudal ELEMENT ins 2.4 MB ES / ES

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Fitting for insertion devices 1.5 MB EN,FR,DE / EU
    MAN Op Instructions 8026-8036-SE36 5.2 MB EN / EU
    MAN Operating Instruction Display 808.8 kB EN,FR,DE / EU
    MAN Quickstart 8026-8036-SE36 6 MB EN,FR,DE / EU
    MAN Bedienungsanlei 8026-8036-SE36 5.2 MB DE / EU
    MAN Man. utilisat° 8026-8036-SE36 5.2 MB FR / EU

    EU Declaration

    Description
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 469.2 kB ML

    Available products

    12 Hits
  • Filter
    • Up to PN10, size of measurement pipes: DN20 to DN400
    • Configurable outputs: one or two transistor output(s) and one or two 4...20 mA current output(s)
    • Removable backlit display/configuration module for indication of flow rate and volume with two flow totalizers
    • Automatic calibration using Teach-In, all outputs can be checked without the need for actual flow