Bürkert
Direct-acting 2/2 or 3/2 way pivoted armature valve
Type 0330 / Article No. 337683
Product description
The 0330 valve is a direct-acting, media separated pivoted armature valve. It is available in 3/2- and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Stainless steel (316L), PVDF, and polypropylene housing versions complete the offering. The solenoid coils are moulded with a chemically resistant epoxy.The coil system is separated by a diaphragm from the media and therefore especially suitable for aggressive media as alkaline and acidic solutions. The 0330 is equipped with manual override for commissioning and testing. For reduced energy requirements all coils can be delivered with electronic power reduction or as an impulse version. The switching status can be indicated with position feedback as a binary or NAMUR signal. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65/67 – in combination with a stainless steel or plastic housing NEMA 4X.
- Commodity Codes
- 84818079
- Country
- DE
Technical attributes
Name |
Value |
Unit |
|---|---|---|
| Type | 0330 | |
| Operation | direct-acting | |
| Actuator type | Pivot | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | T - for universal use - port connections 1 (P/NC), 2 (A/in/out) and 3 (R/NO) depending on application | |
| Fluidic port connection number | 3 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Nominal pressure min | -1 | bar |
| Nominal pressure max (liquid) | 3 | bar |
| Main valve orifice 1 (P) (mm) | 4 | mm |
| Main valve orifice 1 (inch) | 5/32 inch | |
| Main valve orifice 3 (R) (mm) | 4 | mm |
| Kv value (water) | 0,23 | m3/h |
| Main valve wetted material | Brass | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/4 | |
| Port connection 3 type | Inner thread | |
| Port connection 3 thread type | G | |
| Port connection 3 thread marking | 1/4 | |
| Valve seat material | Brass | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Seat seal material Shore hardness | 70 | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment max | 55 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 90 | °C |
| Temperature surface max | 155 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| AC voltage | No | |
| DC voltage | Yes | |
| Battery voltage | Yes | |
| Rated power DC | 11 | W |
| Reduced power DC | 11 | W |
| Rated power consumption | 8 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00008376 - 2508 | |
| Electrical connection position | top | |
| Electrical connection polarity | Irrelevant | |
| Electrical connection material | Brass | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 20 | ms |
| Switch time close min | 10 | ms |
| Switch time close max. | 20 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | Yes | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Installation length | 46 | mm |
| Mounting type | Metric screws | |
| Valve construction | Valve complete | |
| Weight | 0,43 | kg |
Can be combined with
Applications & Tools
Downloads
Data Sheets
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
Type 0330 data sheet | pivoted armature valve | 1 MB | EN / EU |
|
|
Typ 0330 Datenblatt | Klappanker-Magnetventil | 1 MB | DE / DE |
|
|
Type 0330 Fiche technique |Électrovanne à armature battan2/2 ou 3/2 voies à action dire | 1 MB | FR / FR |
User Manuals
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Additional manual 0330 | FM Division 1 US/CA V2.0 | 206 kB | EN / US |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 012X 0330 033X | 2/2-way and 3/2-way solenoid valve | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type 0330 0331 | 2/2-way or 3/2-way solenoid valves, direct-acting | 571 kB | EN / EU |
|
|
Operating Instructions Type 0780 | ATEX approval | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v2.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 2 MB | DE / DE |
|
|
Manual d'utilisation Type ACP016 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Manual de instrucciones Modelo 0121, 0330, 0331 | Electroválvula de 2/2 o 3/2 ví | 954 kB | ES / ES |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 2 MB | FR / FR |
EU Declaration of Conformity
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 43 kB | EN,FR,DE |
Interactive Animation
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
3D-Animation - 0330 | 1 MB | EN |
Flyers and Catalogues
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Brochure contains the following types: 0121 0124 0330 0331 0780 0788 0789 | 1 MB | AL |
|
|
For safe and reliable analysis in In-Vitro Diagnostics | 838 kB | EN / EU |
|
|
Media separation ensures continous and safe processes | 599 kB | EN / EU |
|
|
Overview of approvals: Solenoid valves | 702 kB | EN / EU |
|
|
Selection Chart Solenoid valves | 517 kB | EN / EU |
|
|
Selection Disc | 641 kB | EN / US |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |