Bürkert
This article number 00167761 is only available for a limited time.
The successor items are (can be a little different because of the update): 352637
Would you like to compare them?
Please contact us regarding a successor product.
Plunger valve 2/2 way direct-acting
Type 2610 / Ident No. 167761
Product description
The direct-acting valve Type 2610 is delivered with circuit function normally closed. The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a "kick and drop" electronic that supports the opening phase and afterwards reduction of the opening holding power.
- Commodity Codes
- 84818079
- Country
- DE
Technical attributes
Name |
Value |
Unit |
|---|---|---|
| Type | 2610 | |
| Operation | direct-acting | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 10 | bar |
| Main valve orifice 1 (P) (mm) | 8 | mm |
| Main valve orifice 1 (inch) | 5/16 inch | |
| Kv value (water) | 0,9 | m3/h |
| QNn value (gas) | 970 | l/min |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | NPT | |
| Port connection 1 thread marking | 1/2 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | NPT | |
| Port connection 2 thread marking | 1/2 | |
| Seat seal material category | Plastics | |
| Seat seal material | PTFE (Polytetrafluorethylene) | |
| Sealing toward outside material | PTFE (Polytetrafluorethylene) | |
| Temperature environment min | -40 | °C |
| Temperature environment max | 50 | °C |
| Temperature medium min | -200 | °C |
| Temperature medium max | 180 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50/60 | Hz |
| AC voltage | Yes | |
| DC voltage | Yes | |
| Battery voltage | Yes | |
| Rated power DC | 72 | W |
| Reduced power DC | 4 | W |
| Rated power consumption | 72 | W |
| Electrical connection sort | Screw terminal with cable feed-through | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00181630 - 2511 | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Coil special feature | for high temperatures | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Valve construction | Valve complete | |
| Leakage rate external | 10^-8 mbar l/sec | |
| Weight | 1,100000 | kg |
Applications & Tools
Downloads
Data Sheets
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
Type 2610 data sheet | pivoted armature valve for low and high temperatures | 235 kB | EN / EU |
|
|
Typ 2610 Datenblatt | Durchgangsmagnetventil für tiefe und hohe Temperaturen | 240 kB | DE / DE |
User Manuals
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Additional Manual Type 0131 0255 0256 0283 0287 0290 0293 2610 | El. operating conditions | 132 kB | EN,FR,DE / EU |
|
|
Additional manual Type AC19 | Solenoid coil AC19, II 2G/D Ex approval | 2 MB | EN / EU |
|
|
Operating Instructions Typ 2610 2612 2620 | 2/2-way valve | 374 kB | EN / EU |
|
|
Bedienungsanleitung Typ 2610 2612 2620 | 2/2-Wege-Ventil | 414 kB | DE / DE |
|
|
Manuel d'utilisation Type 2610 2612 2620 | Vanne 2/2 voies | 422 kB | FR / FR |
|
|
Manuel supplémentaire Type AC19 | Bobine magnétique AC19, homologations II 2G/D Ex | 2 MB | FR / FR |
|
|
Zusatzanleitung Typ AC19 | Magnetspule Typ AC19, II 2G/D ExZulassung | 2 MB | DE / DE |
EU Declaration of Conformity
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 37 kB | EN,FR,DE |
Interactive Animation
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
3D-Animation - 2610 | 2 MB | EN |
Flyers and Catalogues
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
For low temperatures and aggressive media. | 156 kB | EN / EU |
|
|
Overview of approvals: Solenoid valves | 702 kB | EN / EU |
|
|
Selection Chart Solenoid valves | 517 kB | EN / EU |
|
|
Solenoid valves for safety in your plant | 787 kB | EN / EU |