Bürkert - Close to you
Office /1
    • Main Office
      Burkert Contromatic Limited
      Fluid Control Centre
      1 Bridge End
      Cirencester
      GL7 1QY
      Phone +44 1285 64 87 20
      Fax +44 1285 64 87 21
      E-Mail fnyrf.hx@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

Bürkert sanitary diaphragm valves

Bürkert has unveiled the next evolution in sanitary diaphragm valves, with our third generation tube valve body. This completely unique new design employs hydroforming technology, resulting in a valve that is 75% lighter than forged housings, extremely energy efficient and offers excellent clean-in-place (CIP) properties.

The latest incarnation of the Bürkert diaphragm valve body has been manufactured using hydroforming technology. Designed for use in hygienic process applications, the new tube valve body meets the latest standards for pharmaceutical, cosmetic as well as food and beverage industries.

Fluid control systems within hygienic applications demand high standards in terms of clean ability, which can be affected by a number of design characteristics. The base material is normally 316L stainless steel which requires an excellent surface finish in order to maximise the efficiency of the clean-in-place (CIP) process that is used to sterilise the process pipework. Coupled with excellent thermal properties, the design of process valves has become a complex process.

Bürkert has delivered the next evolution of diaphragm valve manufacture by patenting a new procedure to create process valves using hydroforming technology. This has significantly reduced the amount of material used, as well as allowing uniformly high quality laser welds that do not add any further material to the component.

The process starts with the flange, which is laser cut and milled, and the tube, both of which are from 316L stainless steel. The tube is placed in a mould, filled with a water-oil emulsion and subjected to around 3,000 bars of pressure to produce the required flow path to and from the weir.

The flange and tube are then laser welded together before the new component is annealed in order to relieve residual stress within the material. This heat treatment process also increases the durability of the material by improving the corrosion resistance. This is enhanced by precision machining of the surfaces of the flange before the final polishing stages are completed.

In the past, the polishing process may have been completed by hand using small electric polishing wheels, which can be labour intensive and time consuming. This process is now automated and uses an abrasive paste that is repeatedly pumped through the valve body in order to achieve a surface finish of less than 0.4 µm. This produces a very uniform surface, which is then electro-polished to give a near mirror finish for all areas that come into contact with the process media.

Lightweight and energy efficient diaphragm valves:

Ian Webster, Hygienic Processing Segment Manager at Bürkert UK, said: “This new manufacturing process allows us to manufacture variants that are as much as 75% lighter than forged housings. The reduced volume of material means that the energy requirement for both heating and cooling during cleaning processes is also greatly reduced.

“The hygienic design and clean ability of the new valve body has been shown to be comparable with that of stainless process pipework and has been certified under EHEDG Type EL, Class I.  By reducing energy requirements and downtime for cleansing processes, the new Bürkert tube valve body has the potential to optimise process efficiency for a wide range of hygienic applications.”

The innovative diaphragm valve manufacturing technique employed by Bürkert also has a greatly reduced carbon footprint, making it more environmentally friendly. An independent study showed that when manufacturing a DN25 cast valve body, almost 7,000 grams of CO2 were produced, compared to the hydroformed valve body that only generates 2,000 grams.

The new tube valve body can be used with EPDM or PTFE diaphragms, both of which have excellent hygiene and chemical resistance qualities, and coupled with Type 2031 CLASSIC pneumatic actuator or a Type 3233 manual actuator to deliver process control solutions for any number of hygienic applications. Initially, the valve tube bodies will be available in ½, ¾, 1, 1½ and 2 inch variants, suitable for welded connections.

 If you wish to talk to the Bürkert team about an application, please call us on +44 (0)1285 648720 or drop us an email at sales.uk@burkert.com.

 

application/pdf

Sanitary diaphragm valves

Download Documents

 

 

 

My Comparison List