What is WRAS approval?
Within the water industry, WRAS approval is the easiest and most recognised way to establish compliance with the Water Supply (Water Fittings) Regulations, so we now have available solenoid valves using WRAS approved seals.
This type of approval demonstrates that the non-metallic material/component does not itself contaminate the water and therefore satisfies this particular requirement of regulations and byelaws.
Burkert's new WRAS approved seals
Some of the most common applications linked to WRAS are water treatment sample boards, urinals and toilet flushing systems.
At Burkert, we now have available valves which contain seals using WRAS approved materials. These seals are non-metallic and therefore appropriate for all your water applications.
You will be able to find these seals on our solenoid valve range. Butterfly valves are also available, however on special request when ordered. We do our best to accommodate your needs as best we can.
Type 6213 with WRAS approved EPDM seal (variant PD23). Following IDs are now available:
ID: 351815 (Brass, 1/4” port, 10mm orifice, 24VDC)
ID: 338317 (Brass, 1/2” port, 13mm orifice, 24VDC)
ID: 350518 (Brass, 3/4” port, 13mm orifice, 24VDC)
ID: 351816 (Brass, G3/4” port, 20mm orifice, 24VDC)
ID: 351817 (Brass, G1” port, 20mm orifice, 24VDC)
Our friendly team
At Burkert we have a friendly and knowledgeable team who are always willing to help. We can answer any of your technical questions and advise you on your application. So don’t hesitate to give us a call!
To find out more about our WRAS approved seals please contact firstname.lastname@example.org or call 01285 648720.